X Series E53 X5 4.6is (M62) OFFRD
11 61 050
Removing and installing intake air manifold
(M62)
Instructions for disconnecting and connecting battery,
refer to General Information MG12.
Disconnect battery negative terminal.
Remove heater bulkhead,
refer to 51 71 080.
Turn fasteners on acoustic cover 90
°
counterclockwise, remove
acoustic cover.
Remove covers for ignition coils.
Disconnect plug connections to ignition coils.
Release bellows on throttle. Remove intake filter housing with air-
mass flow sensor.
Detach battery positive lead from support point on firewall. Feed
out battery positive lead and lay to one side.
Release wiring harness section for engine from intake air manifold
and lay to one side with cable ducts.
Detach hoses for vacuum control of air injection.
Remove vacuum hose from throttle body.
RA Removing and installing intake air manifold (M62)
BMW AG - TIS
10.02.2013 19:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -