X Series E53 X5 4.6is (M62) OFFRD
12 41 020
Removing and installing/replacing starter
motor (M62)
Switch off ignition.
Note:
Follow instructions for disconnecting and connecting battery,
refer to General Information MG 12.
Disconnect battery negative lead from battery.
Remove reinforcement plate.
Caution!
The work step "Removing and installing reinforcement plate"
contains important installation instructions,
refer to 31 10 010.
Remove protective cap (1) of battery positive lead from starter
motor.
Release nut (2).
Tightening torque,
refer to Technical Data 12 41 4AZ.
Disconnect battery positive lead (3) from starter motor.
Unclip battery positive lead from holders.
RA Removing and installing/replacing starter motor (M62)
BMW AG - TIS
10.02.2013 20:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
