bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Wiring Harness Section For Engine (M62)|Page 749 > < 1 RA Replacing Wiring Harness Section For Engine (M62)
Page 2
background image

Disconnect plug connection (1) on starter motor.

Note:

The plug connection is located above the front axle on the
right. For purposes of clarity, the right front wheel is shown
removed.

Detach plug (1) from oil level sensor.

Unclip cable from cable holder (2) and lay upwards.

Disconnect plug connections (1) on left and right monitor
sensors.

Unclip cables from holders on transmission housing.

Disconnect plug connections (1) on left and right oxygen sensors.

RA  Replacing wiring harness section for engine (M62)

BMW AG - TIS

10.02.2013  20:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Replacing Wiring Harness Section For Engine (M62)|Page 749 > < 1 RA Replacing Wiring Harness Section For Engine (M62)