X Series E53 X5 4.6is (M62) OFFRD
Unlock cable holders (2).
Remove cables (1) from cable holders (2).
Release screws (3).
Remove holder (4).
Release cable tie (1).
Disconnect all plugs in control unit box.
Part of this work is described in the work step "Replacing control
unit",
refer to 12 14 550.
Release nut.
Remove grounding cables from ground support point.
Detach profile seal (1) towards top.
Installation:
To prevent leaks, you must install profile seals correctly.
RA Replacing wiring harness section for engine (M62)
BMW AG - TIS
10.02.2013 20:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
