X Series E53 X5 4.6is (M62) OFFRD
Release nuts.
Remove both retaining brackets (1 and 2).
Pull out injection pipe (3) with fuel injectors towards top.
Remove injection pipe with fuel injectors.
Lever out fuses (1).
Pull fuel injectors (2) out of injection pipe.
Installation:
Check O-rings on fuel injectors for damage and replace if
necessary.
Coat O-rings with anti-friction rubber coating (e.g. petroleum
jelly).
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Replacing complete injection pipe (M62)
BMW AG - TIS
10.02.2013 20:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
