X Series E53 X5 4.6is (M62) OFFRD
13 54 250
Replacing inlet hose (between mass air flow
sensor and throttle body) (M62)
Switch off ignition.
Turn fasteners on acoustic cover 90
°
counterclockwise.
Remove acoustic cover.
Release hose clamp (2).
Detach intake hose from air-mass flow sensor.
Installation:
Check sealing ring for damage and correct seating, replace if
necessary.
Do not use any antiseize agent to install sealing ring/intake hose.
Release hose clamp (1).
Detach vacuum hose (2) from intake hose.
Press lock (4) and detach vacuum line (3) from intake hose.
Installation:
Push vacuum line (3) onto intake hose until locking ring can
clearly be heard snapping into place.
Detach intake hose from throttle assembly.
RA Replacing inlet hose (between mass air flow sensor and throttle body) (M62)
BMW AG - TIS
10.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
