X Series E53 X5 4.6is (M62) OFFRD
13 90 500
Replacing tank vent valve (M62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Location:
Tank venting valve is fitted between cylinder head on left and fan
cowl.
Disconnect plug (1).
Remove tank venting valve (2) from holder.
Detach fuel hose (1) from tank venting valve.
Press locking ring (2) and detach hose (3) from tank venting
valve.
Installation:
Push hose (3) onto tank venting valve until locking ring (2)
can clearly be heard snapping into place.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Replacing tank vent valve (M62)
BMW AG - TIS
10.02.2013 20:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
