X Series E53 X5 4.6is (M62) OFFRD
Important!
Do not bend sensor.
Carefully raise fuel level sensor (1) and expose spiral hose (2).
Carefully remove fuel level sensor with fuel pump from fuel tank.
Tilt components in different directions in so doing.
Carefully withdraw fuel level sensor, tilted against direction of
travel, out of tank opening.
Installation:
1.
Replace rubber seal on fuel level sensor.
2.
Fit rubber seal over fuel level sensor flange.
3.
Before pressing fuel level sensor into tank opening,
detach rubber seal from flange and insert into tank
opening.
4.
Press fuel level sensor into tank opening.
RA Removing and installing/replacing sensor for fuel level gauge (right)
BMW AG - TIS
10.02.2013 20:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -