bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Radiator (M62, M54 And M57)|Page 877 > < 1 RA Removing And Installing Radiator (M62, M54 And M57)
Page 2
background image

M62 only:

Detach water hose (1) from radiator at top. 

Detach water hose (2) from radiator at bottom. 

Detach water hoses (1, 2 and 3) from mounting plate.

M62, M54 and M57 with automatic transmission:

Pull lock (1) upwards.

Remove heat exchanger (2) for automatic transmission fluid from
mounting plate on radiator.

Note:

Oil lines remain connected to heat exchanger.

Installation:

Press lock (1) downwards

Push on heat exchanger

The lock must snap audibly into place when the heat exchanger is
forced on.

Installation:

Replace sealing rings (1) on heat exchanger.

RA  Removing and installing radiator (M62, M54 and M57)

BMW AG - TIS

10.02.2013  20:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing Radiator (M62, M54 And M57)|Page 877 > < 1 RA Removing And Installing Radiator (M62, M54 And M57)