X Series E53 X5 4.6is (M62) OFFRD
Pry out retaining plate (1) with a screwdriver and pull out cable (2).
Slacken nut (1).
Tightening Torque,
refer to Technical Data 24 51 1AZ.
Remove shift lever (2).
Screw special tool 24 5 260 into radial seal. Pull out radial seal
by tightening extractor sleeve.
Fit special tool 24 5 490 to the manual shift valve shaft.
Slide radial seal (1) onto manual shift valve shaft.
Note:
Coat sealing lip of new radial seal (1) with transmission fluid.
RA Replacing radial seal for left manual shift valve shaft (A5S 440Z)
BMW AG - TIS
10.02.2013 21:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -