X Series E53 X5 4.6is (M62) OFFRD
24 10 003
Removing and installing / replacing position
switch (A5S 440Z)
Caution!
Risk of burning from exhaust system when working on
position switch.
Therefore: allow exhaust system to cool down.
Release screws and remove protective panel (1).
Release screws and detach position switch (1) from manual shift
valve shaft.
Tightening Torque,
refer to Technical Data 24 15 1AZ.
Unlock and remove cable connector (1).
Detach cable connector from retaining bracket.
Unclip cable from retaining clips on oil sump.
RA Removing and installing / replacing position switch (A5S 440Z)
BMW AG - TIS
10.02.2013 21:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
