X Series E53 X5 4.6is (M62) OFFRD
Installation:
Push rubber gaiter (1) downwards until groove (2) is fully
exposed.
E36 (Z3):
Lever out trim (1).
E36 (Z3):
Disconnect plug connection (2).
Note:
Do not disconnect plug connection (1).
Lay trim (3) with rubber gaiter to one side.
Installation:
The lines must be correctly clipped into the retaining clips so
as to eliminate the risk of damage (jamming of line).
E53:
Remove trim (1) with rubber gaiter (2) from center console.
RA Adjusting interlock cable (Steptronic)
BMW AG - TIS
10.02.2013 21:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
