X Series E53 X5 4.6is (M62) OFFRD
31 12 080
Removing and installing/replacing both
tension struts
Necessary preliminary tasks:
•
Remove front assembly underside protection
•
Remove guide joint
Unfasten nut.
Remove screw towards front.
Remove tension strut.
Installation:
Replace self-locking nut.
Tighten bolt connection in normal position.
Tightening torque 31 12 1AZ
.
RA Removing and installing/replacing both tension struts
BMW AG - TIS
10.02.2013 22:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -