X Series E53 X5 4.6is (M62) OFFRD
1
Nut
2
Axial grooved ball bearing
3
Clamping disc
4
Retainer
5
Control lever
6
Steering column tube
7
Wear plate
8
Spring
9
Clamping fixture
10
Mounting block
11
Rubber stop
Disconnect torsion spring (8) on both sides.
Unscrew nut (1).
Remove axial grooved ball bearing (2) and clamping disc (3).
Remove retainer (4).
Press clamping fixture (9) out of adjusting lever (5) with special
tools 32 1 200 and 32 1 204 .
Grip drive of special tool with open-end wrench.
RA Dismantling and assembling complete steering column
BMW AG - TIS
10.02.2013 23:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
