X Series E53 X5 4.6is (M62) OFFRD
Place oil sump underneath.
Remove Clic hose clamp (1) with special tool 32 1 260 .
Disconnect intake line (2) from power steering pump (5).
Release union nut (3).
Detach pressure line (4) from power steering pump (5) and lay
to one side.
If necessary, release holder of pressure line.
Installation:
Tightening torque 32 41 3AZ
.
Replace sealing ring.
Release screws (1).
Tightening torque 32 41 15AZ
.
Remove power steering pump (2) downwards.
Replacement only:
Release screws (1).
Remove belt pulley (2).
Installation:
Tightening torque 32 41 14AZ
.
Lettering on belt pulley (2) points forwards.
RA Removing and installing/replacing vane pump/power steering pump for power steeri
BMW AG - TIS
10.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
