bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Window Cavity Cover Strip For Door Window, Rea > < 1 RA Removing And Installing_replacing Mount For Window Cavity Cover Strip, Left Or R
Page 1
background image

51 37 000

Removing and installing complete power
window regulator from rear left and right
sides

Release door window glass at rear (do not remove) and
stow at bottom in rear door.

Plug connection (1) must be disconnected from power window
motor (2).

Unscrew nuts (3).

Lever out window regulator (4) and feed out of rear door.

Replacement only:

Release screws (1).

Turn flat motor (2) and detach from window regulator (3).

Lower end stop (4) must not be damaged.

RA  Removing and installing complete power window regulator from rear left and right

BMW AG - TIS

11.02.2013  04:06

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Window Cavity Cover Strip For Door Window, Rea > < 1 RA Removing And Installing_replacing Mount For Window Cavity Cover Strip, Left Or R