X Series E53 X5 4.8is (N62-S) OFFRD
25 16 056
Removing and installing/replacing shift tower
(Steptronic)
Important!
Do not disassemble new Steptronic gearshift bracket.
Note:
Identifying features of new Steptronic shift tower:
1= Position, solenoid valve
2= Black plastic section
3= Aluminum section
Note:
Move selector lever to parking position "P".
Remove transmission underbody protection if necessary.
Necessary preliminary tasks:
•
Remove storage compartment.
Note:
Do not remove oddments tray in E38.
Installation:
The lines must be correctly clipped into the retaining clips so as to
prevent damage (trapping of lines).
RA Removing and installing/replacing shift tower (Steptronic)
BMW AG - TIS
12.02.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
