X Series E53 X5 4.8is (N62-S) OFFRD
32 21 231
Replacing left or right tie rod
Special tools required:
•
32 3 160
Necessary preliminary tasks:
•
Remove tie rod end from swivel bearing
•
Remove gaiter from power steering gear and slide back
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
Important!
To avoid damage to rack and to suspension mounting, move
rack in as far as possible.
Unscrew tie rod with special tool 32 3 160 from rack of power
steering gear.
Tightening torque 32 21 2AZ
.
Determine measurement (A) to simplify following adjustment of
front axle.
Release clamping nut.
Screw off tie rod end; if necessary, grip tie rod with open-end
wrench.
Installation:
Check gaiter, replace if necessary.
Mount clamping ring (1).
Screw in tie rod end to measurement (A).
Tightening torque 32 21 5AZ
.
RA Replacing left or right tie rod
BMW AG - TIS
12.02.2013 07:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -