bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Removing And Installing Center Console|Page 1770 > < 17 RA Removing And Installing Or Replacing Sun Visor And Left Or Right Counter Support
Page 1
background image

51 16 200

Removing and installing center console

Remove bottom right trim panel from instrument panel.

Remove trim panel for pedal assembly.

Remove switch for hazard warning system/central locking.

Remove switch unit in center console.

Release center console at rear.

Release left/right screws (1).

Unclip clips (2) outwards on side carpet (3) on left/right.

Slide side carpet (3) forwards out of retainer (4) and remove.

Installation:

If necessary, replace faulty clips (1) with sealing washer and
retainer (2) on side carpet (3).

Release screw (1).

RA  Removing and installing center console

BMW AG - TIS

12.02.2013  11:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Removing And Installing Center Console|Page 1770 > < 17 RA Removing And Installing Or Replacing Sun Visor And Left Or Right Counter Support