X Series E53 X5 4.8is (N62-S) OFFRD
52 17 034
Removing and installing/replacing shaft for
headrest adjustment (comfort seat)
Headrest must be moved as far forwards as possible.
Remove rear panel at top.
Remove rear panel at bottom.
Withdraw shaft in succession from gear and drive.
Installation:
Carry out function check.
RA Removing and installing/replacing shaft for headrest adjustment (comfort seat)
BMW AG - TIS
12.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -