X Series E53 X5 4.8is (N62-S) OFFRD
72 11 103
Removing and installing / replacing rear
center safety belt
Remove rear seat.
Lower strap:
Release screw (1).
Remove belt buckle on right (2) and lower strap (3) for seat belt at
rear center.
Installation:
Tightening torque, 72 11 9AZ.
Inertia reel:
Release screw (1).
Remove belt buckle on left (2) and top strap (3) for seat belt at
rear center.
Installation:
Tightening torque, 72 11 9AZ.
Installation:
Lug (1) must snap into place in bore (2).
RA Removing and installing / replacing rear center safety belt
BMW AG - TIS
12.02.2013 17:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -