X Series E70 X5 3.0d (M57T2) OFFRD
11 53 000
Removing and installing / replacing coolant
thermostat (M57T2)
Necessary preliminary tasks:
•
Drain coolant
•
Remove fan
•
Remove EGR cooler
Recycling:
Catch and dispose of coolant in a suitable container.
Observe country-specific waste-disposal regulations.
Lever out lock (1)
Lever out lock (2) and detach coolant hose.
Release screws (3).
Carefully remove thermostat housing to one side.
Risk of damage to coolant pipe (1).
Note:
The coolant thermostat is integrated in the coolant thermostat
housing and can only be replaced as a complete unit.
Installation:
Clean sealing surfaces.
Replace seal (1).
RA Removing and installing / replacing coolant thermostat (M57T2)
BMW AG - TIS
03.02.2013 18:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
