bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Removing And Installing_replacing Power Steering Pump For Power Steering Gear Wi|Page 988 > < 10 RA Removing And Installing Power Steering Pump For Power Steering Gear With Active |Page 986
Page 1
background image

32 41 037

Removing and installing/replacing power
steering pump for power steering gear with
Dynamic Drive (M57T2)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Seal off hydraulic lines with plugs.

Note:

When replacing power steering pump:

Fluid reservoir must be replaced in event of metal abrasion,
sluggish pump shaft or increased wear!

The filter integrated in the fluid reservoir can only absorb a limited
amount of foreign particles. If the filter clogs, the hydraulic system
can no longer be sufficiently protected.

Metal abrasion is perceived in the fluid reservoir as metallically
glittering hydraulic fluid.

It is only necessary to replace the fluid reservoir because of leaks
(e.g. at hose connections) only in the event of the unavoidably
high ingress of dirt.

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove acoustic cover

Remove belt pulley

Remove left charge air line

Remove steering gear cover at top

RA  Removing and installing/replacing power steering pump for power steering gear wi

BMW AG - TIS

03.02.2013  21:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Removing And Installing_replacing Power Steering Pump For Power Steering Gear Wi|Page 988 > < 10 RA Removing And Installing Power Steering Pump For Power Steering Gear With Active |Page 986