X Series E70 X5 3.0d (M57T2) OFFRD
Wheel studs with taper:
a)
Wheel bolt - galvanised
b)
Wheel bolt - black chrome plated
c)
Wheel bolt - black chrome plated and lockable
d)
Lockable wheel stud with adapter, black chrome-plated
Note:
To release and tighten down lockable wheel stud, use a
matching adapter from special tool 36 1 300 .
Clean wheel bolts and check threads for damage, replace, if
necessary.
Replace rusty wheel bolts.
Important!
Do not apply oil to new wheel bolts.
Important!
Under no circumstances use pneumatic or power
screwdrivers to install and tighten the wheel bolts.
Important!
Disc wheel must rest uniformly against brake disc.
If the wheel bolts/rims are not BMW-original, it will be
necessary to retighten the wheel bolts on account of settling.
Fit wheel studs and evenly tighten crosswise by hand in order to
centre the disc wheel.
Tighten down wheel bolts in crosswise sequence with a calibrated
torque wrench to prescribed tightening torque.
Tightening torque 36 10 1AZ.
RA Removing or installing front or rear wheel
BMW AG - TIS
03.02.2013 22:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
