bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

29 RA Removing And Installing Right Glovebox|Page 1663 > < 28 RA Removing And Installing_replacing Lock Cylinder For Passenger Airbag Deactivatio|Page 1661
Page 1
background image

51 16 360

Removing and installing right glovebox

Necessary preliminary tasks:

Remove Central Information Display

Remove right fresh-air grille

Remove insert for glovebox

Lever out cover (1) and release screw underneath.

Unfasten screws (2 and 3).

Unclip light (4) and disconnect plug connection.

Disengage Bowden cable (1) on left and right at lock (2).

Installation:

Carry out function check on emergency release mechanism.

Pull out glovebox (1) slightly.

Disconnect all plug connections (2) and detach cable from
glovebox.

Disengage Bowden cable (3) on left and right at lock (4).

Remove glovebox (1).

RA  Removing and installing right glovebox

BMW AG - TIS

04.02.2013  01:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

29 RA Removing And Installing Right Glovebox|Page 1663 > < 28 RA Removing And Installing_replacing Lock Cylinder For Passenger Airbag Deactivatio|Page 1661