bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Right Ignition Unit For Right Xenon Headlight > < 9 RA Replacing Control Unit For Right Xenon Headlight
Page 1
background image

63 12 870

Replacing ignition unit for left xenon
headlight (with xenon bulb)

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.

Important!

Ignition unit and xenon bulb are viewed as a single
component and must not be separated!

Unlock retaining tab (1) and remove cover (2) from headlight.

Installation:

Make sure cover (2) is correctly seated on headlight. 

Disconnect plug connection (1).

Unlock spring wire clips (2).

Remove ignition unit for xenon headlight (3) from headlight.

Installation:

Make sure ignition unit (3) is exactly seated in headlight.

RA  Replacing ignition unit for left xenon headlight (with xenon bulb)

BMW AG - TIS

04.02.2013  06:06

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Right Ignition Unit For Right Xenon Headlight > < 9 RA Replacing Control Unit For Right Xenon Headlight