X Series E70 X5 3.0Sd (M57T2) OFFRD
Release screws (arrows).
Replace profile gaskets (1).
Sealing faces clean and free of seal debris.
Remove gasket debris from sealing faces (2) of cylinder head
and clean.
Apply a bead of Drei Bond 1209 sealing compound (refer to BMW
Parts Service), approx. 3 mm wide and 2 mm high, in area of
joints (1).
Note:
Illustrations show M57.
Assemble engine.
RA Removing and installing / sealing cylinder head cover (M57T2)
BMW AG - TIS
05.02.2013 01:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -