X Series E70 X5 3.0Sd (M57T2) OFFRD
Remove bolts (arrows).
Replace profile gaskets (1).
Clean sealing surface to remove all gasket remnants.
Remove gasket debris from sealing faces (2) of cylinder head and
clean.
Apply a bead of Drei Bond 1209 sealing compound (refer to BMW
Parts Service), approx. 3 mm wide and 2 mm high, in area of
joints (1).
Note:
Illustrations show M57.
Assemble engine.
RA Removing and installing, sealing/replacing cylinder head cover (M57TU)
BMW AG - TIS
05.02.2013 01:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -