X Series E70 X5 3.0Sd (M57T2) OFFRD
11 28 050
Removing and installing/replacing drive belt
(elastobelt) for A/C compressor (M57TU2)
Special tools required:
•
11 0 331
•
11 6 480
Necessary preliminary tasks:
•
Remove front splash guard.
•
If necessary, release bracket on A/C compressor.
Rotate engine with special tool 11 6 480 in direction of engine
rotation.
At the same time, pull off drive belt (2) towards front in direction
of arrow using a clean cloth (1).
Remove drive belt (1) towards front.
Fit drive belt (1) on A/C compressor.
Mount drive belt (1) with special tool 11 0 331 on belt pulley in
direction of arrow.
RA Removing and installing/replacing drive belt (elastobelt) for A/C compressor (M5
BMW AG - TIS
05.02.2013 01:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -