X Series E70 X5 3.0Sd (M57T2) OFFRD
Cams of both camshafts must point to top right.
Place special tool 11 6 321 on exhaust camshaft.
Secure special tool 11 6 321 with special tool 11 6 322 .
Installation:
The exhaust camshaft only has to be checked, adjustment is not
possible.
Secure special tool 11 6 254 to cylinder head with bolts (1).
Note:
See illustration.
Check exhaust camshaft axial clearance.
Set up special tool 11 6 252 with dial gauge.
Refer to Technical Data.
Note:
Illustration shows inlet camshaft.
Procedure for exhaust camshaft is identical.
If necessary, adjust valve timing.
Assemble engine.
RA Removing and installing / replacing exhaust camshaft (M57T2)
BMW AG - TIS
05.02.2013 01:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -