X Series E70 X5 3.0Sd (M57T2) OFFRD
12 14 550
Replacing control unit (DME)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection)
Necessary preliminary tasks:
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove microfilter housing
Important!
Follow instructions for removing and installing control units
Replacement:
•
Carry out programming/coding
Important!
It is absolutely essential to read out the fault memory with the
MoDiC or the BMW DIS and to create a fault memory printout.
Switch off ignition.
RA Replacing control unit (DME)
BMW AG - TIS
05.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
