X Series E70 X5 3.0Sd (M57T2) OFFRD
12 41 020
Removing and installing/replacing starter
motor (M57TU, M57T2)
Necessary preliminary tasks:
•
Disconnect battery negative terminal.
•
Remove transmission underbody protection
Slacken nut (1).
Slacken nut (2).
Release screws (1).
Note:
Illustrations show M57.
Press starter motor (1) forwards and swivel past engine carrier.
RA Removing and installing/replacing starter motor (M57TU, M57T2)
BMW AG - TIS
05.02.2013 02:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -