X Series E70 X5 3.0Sd (M57T2) OFFRD
12 51 001
Replacing wiring harness section for engine
(M57T2)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery negative lead from battery and lay to one
side
•
Disconnect control unit, refer to Replacing control unit
•
Remove intake air manifold
•
Remove underbody protection
Unlock tab (1), pull contact carrier (2) in direction of arrow out of
housing.
Release screws on cable duct (1).
RA Replacing wiring harness section for engine (M57T2)
BMW AG - TIS
05.02.2013 02:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
