bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 Fuel System (M57T2) > < 1 RA Removing And Installing_replacing Electronics Box|Page 480
Page 1
background image

12 90 100

Replacing fan for electronics box 

Note:

Follow instructions for removing and installing electronic control
units.

Necessary preliminary tasks:

Remove control unit

Read fault memory. 

Switch off ignition.

Unclip plug (1).

Remove DDE control unit (3).

Remove relay plug-in (5) towards top.

Release screws (4).

Lift out device carrier (2).

Unfasten plug connection and disconnect.

Release air cowl (1).

Remove electric fan (2) with bracket.

Add final details to vehicle.

Read fault memory.

RA  Replacing fan for electronics box

BMW AG - TIS

05.02.2013  02:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 Fuel System (M57T2) > < 1 RA Removing And Installing_replacing Electronics Box|Page 480