X Series E70 X5 3.0Sd (M57T2) OFFRD
13 71 000
Removing and installing/replacing intake filter
housing (M57T2)
Necessary preliminary tasks:
•
Switch off ignition
Remove upper section of intake filter housing, see: Change
air filter element
Lever out expander rivets.
Press lock and raise intake duct.
Detach intake duct from air filter housing and remove.
Pull intake filter housing off supporting points.
RA Removing and installing/replacing intake filter housing (M57T2)
BMW AG - TIS
05.02.2013 02:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
