X Series E70 X5 3.0Sd (M57T2) OFFRD
Installation:
Seal (1) must always be replaced.
Carefully raise service cap (1).
Unclip plastic tube (2).
Unlock and detach quick-connect couplings (3).
Remove fuel pump.
Important!
Catch escaping fuel in suitable container.
No fuel is permitted to get into the interior!
Unclip fuel level sensor (1) in direction of arrow from housing and
then slide out of guides (2) in direction of arrow.
Installation:
Fuel level sensor (1) must be felt and heard to snap into place.
Disconnect plug connection (1) and disengage cable (2) from
guides.
RA Removing and installing or replacing fuel gauge sensor (diesel, right)
BMW AG - TIS
05.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -