X Series E70 X5 3.0Sd (M57T2) OFFRD
17 11 035
Removing and installing/replacing fan cowl
with electric fan (M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove acoustic cover
•
Remove underbody protection
Lever out expander rivets on transverse reinforcement.
Press lock and raise intake duct.
Detach intake duct from air filter housing and remove.
Unclip Bowden cable for engine bonnet/hood actuator from
transverse reinforcement (1).
Release screws on left and right sides. Tightening torque
51 71 4AZ
.
Remove cross-brace (1).
Unlock plug (1) and remove.
RA Removing and installing/replacing fan cowl with electric fan (M57T2)
BMW AG - TIS
05.02.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -