X Series E70 X5 3.0Sd (M57T2) OFFRD
Cut exhaust pipe at marked point with special tool 00 2 210 and
deburr with a standard tool.
Secure exhaust system against falling off.
Release bolt and remove bracket (1).
Tightening torque 18 20 4AZ
.
Release screws and remove holder (1). Tightening torque
18 20 3AZ
.
Note:
Texts refer to and illustrations show the left side. The procedure is
identical for the right side.
Lower and remove rear muffler with assistance of a second
person.
Installation:
Connect centre muffler to rear muffler by means of clamp and
align.
Centre clamp and tighten down.
Tightening torque 18 20 5AZ
.
RA Replacing rear muffler (M57T2)
BMW AG - TIS
05.02.2013 03:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -