X Series E70 X5 3.0Sd (M57T2) OFFRD
•
Support engine with lifter when removing transmission
Unfasten nut.
Disconnect cable (1).
Installation:
•
Unfasten nut.
•
Adjust cable by means of holder (2) until spacing
A = 1 mm is obtained
•
Tighten nut.
Slacken nut (1).
Detach line (2) from rubber mount.
Detach line (1) from front axle.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
RA Removing and installing automatic transmission (GA6HP26Z) M57T2
BMW AG - TIS
05.02.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
