X Series E70 X5 3.0Sd (M57T2) OFFRD
•
Unlock plug (1) by turning and disconnect
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve
These tasks are described in Notes on mechatronics.
(Important: Observe important note)
Insert special tool 24 1 370 into opening of transmission
housing and secure with screw (1).
Note:
Note installation position.
Lug (2) must point in opposite direction to direction of travel.
Release screw (1).
Remove metal plate (2).
Crank engine at vibration damper with special tool 11 6 480 in
direction of arrow until bolt (1) is visible in opening.
Release all 4 bolts of torque converter with special tool 24 1 110
.
Tightening torque 24 40 1AZ
.
RA Removing and installing automatic transmission (GA6HP26Z) M57T2
BMW AG - TIS
05.02.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
