bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Manual Emergency Release Of Transmission Lock|Page 704 > < 1 RA Replacing Torque Converter Shaft Seal (GA6HP26Z)|Page 701
Page 1
background image

24 34 ...

Manual emergency release of transmission
lock

In the event of a power supply interruption, e.g. flat battery or
electrical fault, the transmission lock must be manually released,
otherwise the wheel will be locked and the vehicle cannot be
moved. 

Important!

Secure vehicle against rolling, e.g. with chocks.

Press the brake pedal when manually releasing the
transmission lock, otherwise there is a risk that the vehicle will
roll when the transmission lock is manually released.

If the parking brake has to be released as well, observe the
following procedure:

1. 

First, manually release the parking brake.

2. 

Then manually release the automatic transmission lock.

Note:

The release tool is located in the tool kit under the floor panel in
the luggage compartment!

Slide back cover mat (1) of drinks holder and remove.

RA  Manual emergency release of transmission lock

BMW AG - TIS

05.02.2013  03:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Manual Emergency Release Of Transmission Lock|Page 704 > < 1 RA Replacing Torque Converter Shaft Seal (GA6HP26Z)|Page 701