X Series E70 X5 3.0Sd (M57T2) OFFRD
26 20 000
Removing and installing front propeller shaft
(N52K, M57T2)
Important!
Do not move vehicle with drive power once propeller shaft has
been removed.
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove reinforcement plate
Release screws.
Installation:
Replace screws and nuts.
Slide propeller shaft towards rear and remove flexible disc with
centering flange.
Tightening torque 26 11 9AZ
.
Installation:
Slide propeller shaft fully towards rear.
Cup seal (1) must snap audibly into place and rest entirely on
dust guard (2).
RA Removing and installing front propeller shaft (N52K, M57T2)
BMW AG - TIS
05.02.2013 03:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
