X Series E70 X5 3.0Sd (M57T2) OFFRD
27 10 010
Removing and installing transfer box ATC 700
(automatic transmission)
Important!
After replacement, the "Repair" service function must be
carried out with in the BMW diagnosis system.
Warning!
Danger to life!
Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.
Important!
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 00 11AZ
.
Oil level up to filler edge of filler plug (1).
Use only approved gear oil.
Failure to comply with this requirement will result in serious
damage to the transfer box!
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove exhaust system bracket from transmission and
transfer box
•
Remove propeller shaft
•
Remove front propeller shaft
•
Support transmission.
•
Remove transmission cross-member.
RA Removing and installing transfer box ATC 700 (automatic transmission)
BMW AG - TIS
05.02.2013 03:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
