X Series E70 X5 3.0Sd (M57T2) OFFRD
Drive a hole into radial shaft seal (1) using a centre punch (2).
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Screw in special tool 23 0 490 .
Drive out radial shaft seal (1) with impact weight (2).
Drive in radial shaft seal with special tool 27 1 470 .
Add final details to vehicle.
Check oil level.
Check transmission for leaks.
RA Replacing radial shaft seal for front axle output (ATC 700)
BMW AG - TIS
05.02.2013 03:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
