X Series E70 X5 3.0Sd (M57T2) OFFRD
51 47 490
Removing and installing / replacing front
assembly underside protection
Note:
Illustration created using X5 3.0i as an example. There may be
differences in detail in the case of other models.
Release screws (1).
Pull forward assembly underside protection (2) under bumper
trim (3) and remove.
Installation:
Centre underside protection (2) and tighten down screws (1).
RA Removing and installing / replacing front assembly underside protection
BMW AG - TIS
05.02.2013 04:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -