X Series E70 X5 3.0Sd (M57T2) OFFRD
51 47 491
Removing and installing/replacing rear
underbody protection
Note:
Illustration created using X5 3.0i as an example. There may be
differences in detail in the case of other models.
Release screws (1) and remove underbody protection (2).
Installation:
Centre underside protection (2) and tighten down screws (1).
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
05.02.2013 04:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -