X Series E70 X5 3.0Sd (M57T2) OFFRD
Important!
Use rubber mount with spline teeth (1)!
Installation:
Keep rubber mount (1) and bushing in control arm clean and free
from oil and grease.
Press rubber mount (1) (from chamfered end of control arm
bushing) with special tools 31 4 152 and 31 4 153 into control
arm bushing as far as it will go.
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment/adjustment for
active front steering
RA Replacing rubber mounts for front axle carrier in both lower control arms
BMW AG - TIS
05.02.2013 04:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -