X Series E70 X5 3.0Sd (M57T2) OFFRD
31 31 000
Removing and installing complete left or right
spring strut shock absorber
Warning!
Danger to life!
Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.
Necessary preliminary tasks:
•
Remove side assembly compartment partition wall
•
Remove spring strut holder
Important!
Risk of damage
Secure spring strut against falling out.
Unscrew nuts (1).
Installation:
Clean contact surface in spring strut dome.
Replace self-locking nuts.
Tightening torque 31 31 1AZ
.
Version with Vertical Dynamics Management: Disconnect both
plug connections (1).
Disconnect plug connection (2) on impulse sensor.
Disconnect plug connection (3) from brake lining sensor.
RA Removing and installing complete left or right spring strut shock absorber
BMW AG - TIS
05.02.2013 04:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -