X Series E70 X5 3.0Sd (M57T2) OFFRD
Assembly:
Position Low Profile band clamp in installation position (A) on
gaiter.
Place special tool 31 5 200 on lugs (1, 2).
Note:
Make sure that the movable piece (3) of the special tool is placed
on lug (1).
Check and if necessary correct positions of gaiter and
Low Profile band clamp.
Compress Low Profile band clamp with special tool
31 5 200
and press on end of band clamp (1).
Relieve tension on special tool and remove.
Check hook fastener (H); if necessary, repeat operation with new
Low Profil band clamp.
RA Notes on removing and installing Low Profile band clamps
BMW AG - TIS
05.02.2013 04:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -