X Series E70 X5 3.0Sd (M57T2) OFFRD
•
Attach quick-clamping holder/quick-clamping unit to vehicle
and remove clamping levers in area of front wheels
•
Attach pickup to quick-clamping holder/quick-clamping unit,
align using bubble level and connect to rotary plates
Note: When using quick-clamping units, perform rim runout
compensation after installing the pickups.
•
If necessary, attach spoiler adapter.
•
Install brake tensioner.
•
Enter customer and vehicle data
•
Identify chassis version and select vehicle
•
Enter tyre pressure and tread depth
•
Measure and enter vehicle ride height
If the ride height is outside the tolerance range (+40/-
20 mm), the vehicle must be loaded and measured/aligned
in the design position.
RA KDS chassis/wheel alignment check with ride-height measurement without load
BMW AG - TIS
05.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
